Package arrived as described, well packed and protected. Had to wait a few days to install but things went together well and the truck looks and runs great with this installed. I will make a comment on the number of thanks I received from the various depts. It is a fine model for customer service excellence. I will be looking at your other products as time allows.
Great product, great instructions and easy to install!!
Good installation instructions, looks classy! Slight performance boost
What a nice add on! I think it is a must have.
Replaced an aFe pipe with the SPE Motorsport pipe because the aFe pipe kept blowing the boots off since installing the SPE pipe I’ve gained a tenth in fuel mileage and the performance is excellent truck runs better and the boots don’t blow off.
Great quality and easily added to your truck with no tuning.
Just wrapped up my install of the hot side pipe. Love the look of the polished pipe. The pipe definitely is much better quality than factory!
Install was a breeze and looks amazing under the hood. Well worth the investment!
Fits nicely!! You can feel the difference in how it seals compared to the oem pipe. The seal that comes with it, is a firm seal.
Great fit. Installed it in 15 minutes. Awesome product. Light years ahead of original design.
Like the way it looks and next I will be putting on the SPE piping kit to go with the hot side. To make it easier for others I tightened the clamp before I slid the piece onto the turbo.
Hot side went in great and definitely better than stock.
This hot side pipe is like a sore johnson!! You just can’t beat it! The price, the quality of the parts, the upgraded o-ring etc! Truly changes the look and performance of the truck!!
Components installed on a 2020 F450. Have been monitoring data on a Bank iDash for some time now and thought I had a great running truck with only 22k on the clock. However, after installing both the cold and hot side CAC tubes, I now have a better throttle response and significant increases in boost pressure. These psi gains are at much lower EGTs than ever before. Even seeing 9-10 psi under engine brake on, deceleration conditions, flat Florida ground, with a nominal 18k load. In summary, must have had a leak somewhere with a faulty o-ring and must have picked up flow efficiency with the larger diameter hot side. Either way I think this was money well spent. Will by more from SPE. *Install tip – add a little of that dielectric grease not only to the o-rings but to the silicon hose ends for much easier installation.
Great quality! Install was a breeze and fitment was great!
Excellent material and hardware. Very good products from SPE!
Easy install however I suggest you install and tighten the turbo side sleeve before clicking it in. It can be rotated once installed. Great item!
Hi quality product
You can see my the pic I installed it incorrectly. Had to flip it
The long side goes to the turbo
Another great product from SPE
Multiple dealers telling me my 2016 f250 truck is fine with not holding boost and getting avg 12 mpg. I swapped out intercooler pipes, now it holds boost and get an avg of 18.5mpg. Great replacement part even if your truck runs perfect. Would even recommend to ford for future models to include.
Give the truck the nice under the hood look
Nice product. Watched a video and picked up on some helpful tips…dry fitting and getting clamps oriented just right on the turbo side with the collar oriented as so the retainer clip is accessible is important. I just happen to be now taking off both upper and lower intake in order to clean and change turbo oil tube and coolant tube, so found it easier to remove the hot side to get the upper intake off, so being i orientated the retainer clip, it was easy to pull back off. I highly recommend this product. Only downer is no window sticker!!!
Great product, all high quality parts. Fit as factory OEM, looks great.
Replaced my aging factory hot air tube and hoses that had heat/pressure cracks that caused loss of turbo boost pressure.
Noticeable difference with sound and boost pressure gain.
Easy enough to install. Make sure to lube ends before trying to assemble as they grab and won't slide on.
Replaced my sinister pipes for these babies, better fit, less clamps, tighter fit too!
Products are top quality what was expected and more. Good solid addition to the truck good power gains throughout power ban and looks great!
It looks and fits great. I did notice better acceleration, but I’m not sure on performance since my factory one had a slight leak on the bottom of the turbo side that I couldn’t see while it was on.
Replacing another subpar factory part goes great with my intake pipes from SPE!
Great fit, worked very well
Good Quality I loved. Thank you guys
Hot side pipe went in with no issues. Instructions were ok, you tube had quite a few videos so I wasn’t concerned. Definitely makes the engine bay look better, and I don’t have to worry about the crappy stock one failing.
Received my order in a few days a quality is way better than oem couldn't be happier.
Excellent fit and very good quality parts
Good product only issue I had was one of the boots started cracking on the edge and pieces started coming off of it during the install.
Went on well Instructions were easy to read. Got my lost boost back!!
Great product much more increase compared to the factory. Again parts are great quality. Set some time aside when doing this one. The hose clamp to the turbo is a time consuming one but I recommend doing dry fits before tightening all down.
Nice hose replacement. But make sure you follow torque spec on clamps. Nuts easily strips on T-bolt. Had to reuse one of my original clamps because they are a little beefier.
Nice product. The fit wasn't the greatest, it is jammed up against the intake horn. I had to take a screw driver and shove the clamp in between the intake and the new pipe boot.
Easy install and looks great!
Took 15 minutes to install . Such a beefy set up it looks so good ! Now my 6.7 can eat properly !!! Thank Spe
Straight forward install, pretty tight fit but what isn’t in these motors? Definitely helps clean up the engine bay more! Clamps, boots, and pipe itself are extremely sturdy and built to last.
The quality is second to none. Tubing is nice a thick, perfectly bent. Brand X tubing collapsed at the end under the clamp with the heat. I think my problem is solved with this quality product. Thanks for making it right
Awesome product!! Always to perfect fit.
Tight fit but very nice
Fairly easy to install and looks great!!! A lot more air flow!
Installed with the coldside kit and very easy to install. It was a tight fit. The entire kit is very high quality. Overall the engine bay has a much cleaner look.
Super easy to install. Looks much better too! The couplers are way heavier than oem too
Nice easy install and looks great
Product is excellent, don’t follow instructions given, google how to install much earlier
Great quality products, will continue to buy from SPE!
Fits perfectly. Easy install makes a great match to my cold side.
Great product and looks good under the hood
I didn't share a photo or picture because I haven't installed it yet. It came right before I went on vacation and didn't want to do it before I traveled.
Looks good, haven’t installed yet. I bought the cold side a few months back but it was missing the 3 aluminum plugs, I requested but haven’t heard back
Awesome part!! Backed up by even better people!!
I would love to install all my stuff but I'm still waiting on my cold air intake to get in I ordered may 22nd
Parts were packaged very well to prevent scratching. Easy to install. SPE never disappoints
Looks great! Install is pretty easy other the hose clamps, threads on hose clamps could be a little longer if ease of installation.
Talkin about no more boost leak! Thank y’all for the great products that makes a difference.
You get what you pay for
Bought this product for a higher quality upgrade. The cosmetic upgrade is just a bonus. Everything is the high quality manufacturing and fits perfectly. High recommend.
Great upgrade to the 6.7 while keeping things mostly stock. Replaced the cold side pipe after it burst and several months later decided to do the hot side to match. Glad that I did! Not only do the parts look great but it has also greatly improved throttle response and seeming improved MPG slightly.
Fixed the issue
The product was exactly how it was explained and resembled the picture to a T it fit like a glove and it completed the engine compartment
Excellent product! Amy was very helpful in getting my item delivered after UPS was screwing it up. Have had it on now for 15k miles, can definitely see Performance increase. No hard numbers, maybe placebo, but puts a smile on my face. Easy install, great replacement item over the stock. Thanks!
Install was pretty simple and I’m not a mechanic
Love it fits tight way better than other hot side intercooler pipes
Great quality and super fast shipping. The only negative was the included directions were terrible; however, I found a YouTube video that was very helpful.
Hot Pipe Side....2017 F-250 install. Excellent machining on all parts. Fit is excellent....tight on some of the clamps but still very nice. Hardest part was removing the clip from the OEM coupling...you are able to turn the coupling which will help you tremendously and you will need a Long thin flat head screwdriver unless you know a diesel mechanic that has the 2 prongs that will aid you in your quest to remove that screwy clip...this in itself took 1 hour to remove after reading all instructions thoroughly. But, once removed the install is easy. Fitment needs to be thought out....you will need to install on clamp on the aluminum coupling and tighten it onto the hose prior to putting it on because you will not be able to once the coupling is clipped on. Then have the base put on first. Overall, very nice!
Simple upgrades that anyone would want to do! Instructions are easy to follow in addition to the correct pictures to complete the job! Both hot and cold pipes adds a clean look to engine compartment.
Real easy to install.
Well made and a nice looking kit but overall it’s just eh.
I really love the parts and they sent it right away when it was on ordered it makes the truck perform very very good and I am really happy with it
Awesome product . Simple to install looks great
Little hard to install since the boots are new and thicker and space is tied but managed to make it. A little soap and water helps a lot to move the clamps around. Nice tide fit, looks great and the truck responds better. Hot and cold side should be replace for a better performance and a peace of mind. Great product.
Very solid kit more airflow, less
Initial thoughts. Pipe looked good and fit nicely, clamps and boots fit nicely. My boost leak was fixed immediately after install. After 5,000 miles the pipe is still working perfectly with no issues at all. Only complaint is it would be nice if the clamps for the boots had a torque spec.
SPE parts are tested and proven and always top notch
Awesome product fitment and quality is top notch. Thanks again SPE.
Love the look and install was nice Instructions we’re good just let ppl know to remove the oil dip stick bolts and it’s a lot easier then. it’s a very sexy add on under the hood thanks for all the help and cool Products in stock customer for life
P.S need a t shirt thanks xl
Amazing quality and great instructions. It was super easy to install and definitely makes the engine bay look more clean.
Pipe went on great! The boots are made of some high quality material! Got it powder coated and installed it in no time. Took her a drive to test it and everything’s good. Great product!
The fitment was pretty good, one other thing on the coupling that connects to the turbo outlet the slots for the clip we’re too narrow, And the T bolts on the clamps could be a little longer maybe 1/8 to 1/4 inch, Other than that OK
Parts look great very nice
Fit was good and looks great.
This product was really easy to install.
Quality product, larger than the stock 2017 hot side, better flow!
Works good never had issue
Awesome product and a definite upgrade in looks, flow and quality from factory hot side pipe!
I will say, it’s much easier to install the hose on the turbo adapter and clamp it tight BEFORE snapping it onto turbo.
Easy to install, better performance looks great on engine bay.
During a routine 60k inspection I grabbed the hot side pipe, I noticed it had a lot of play, I haven't heard any leaking, but it shouldn't be like that. The SPE replacement fit right on, nice & tight, looks good. It took maybe 15 minutes total. Guys be careful don't pull too much on your hostile pipe.
Quality piece of hardware. Bigger diameter then stock and I believe the components will last the lifetime of the truck. Install takes a little longer than I figured because of the tight quarters close to the turbo. Fit isn't perfect but close enough that now one will notice. I'm happy with my purchase and look forward for more parts in the future.
I really feel performance I glad change it
Everything but the clamps are top notch. During tightening, two out of the four provided t-bolt clamps broke before they were even tight. Snapped the threads right off. Fortunately, the stock Ford clamps are big enough and are totally adequate for the pipe ends. The fit and finish is great and I love knowing the truck is breathing better!
Well got it then had it powder coated , the instructions were easy to follow and also there are videos on YouTube of how to install it if you don’t like reading!! For a non mechanic was fine!!
Parts were well organized in the box, good directions and good fit when installed.
Fits perfect spot on performance great.
The install was fairly easily. The instructions are very brief and pictures are hard to see. I had to modify one step during install due to my truck still having the stock plastic intake plenum. In the photo they tell you to attach the new metal adaptor with the snap ring then the silicone boot. If you do that you will never get to the t bolt clamp. I had to put the boot and clamp on first. Other than that it went smooth. Looks and performs awesome.
Easy to install, looks great.
2019 F-350 with 132,400 miles in 11 months. I installed the billet fuel drain valve at 100,000 miles as soon as warranty was over. Makes draining easier with no more fear of breaking the cheap plastic factory valve.
Hot & Cold side installed within last 2500 miles. They look great installed. Definitely better quality than factory. Cold side was super easy to install. 10mm socket top clamp, 11 mm bottom socket clamp.
Hot side was difficult but can be done by a novice (like me). No more worries about collapsed hose or fitting failure. My 3rd Super Duty last 350 pipe failed at 154,000 miles. I got SPE cold & hot sides for less than That one repair cost me.
I can not stress to you enough the quality of SPE products, they are exemplary.
My next trip/load should buy me the new turbo.