Fixes the problematic OEM plastic intercooler boot on the 2011-2016 Powerstroke as well as the silicone boot on the 2017-2022 Powerstroke, both which are known to explode or burst under high boost and increased heat.
Easy install— Simple instructions that even an amateur can follow.
Durable— Includes a billet anodized throttle body adapter and flexible 5-ply silicone coupler boot.
Integrated Reference Ports— Gives you the ability to read boost reference or use for injectables with no drilling required.
No Tuning Required— Designed to work with factory & tuned vehicles.
2011-2016 Ford SuperDuty F-250/F-350/F-450/F-550 6.7L Powerstroke
2017-2019 Ford SuperDuty F-250/F-350/F-450/F-550 6.7L Powerstroke
2020-2022 Ford SuperDuty F-250/F-350/F-450/F-550 6.7L Powerstroke
The SPE Cold Side Pipe for your 6.7L Powerstrokefixes the problematic OEM plastic intercooler boot on the 2011-2016 Powerstroke as well as the silicone boot on the 2017-2022 Powerstroke, both which are known to explode or burst under high boost and increased heat.
The SPE Cold Side Pipe increases reliability, durability and performance. The kit includes a billet anodized aluminum throttle adapter with 3 reference ports as well as a 5-ply silicone hose coupler. The throttle body adapter retains thefactory air intake valve thus allowing you to retain your trucks factory emissions components and making for an effortless install.
NEXT LEVEL DESIGN
SPE has taken the 6.7L Powerstroke cold side pipe to the next level. SPE based the design off of the FACTORY 2017+ 6.7 cold side intercooler pipe. Mainly, we wanted to give the customer more options and a better quality product over the factory unit. The main change is obviously material selection. The throttle body is now billet aluminum instead of the factory composite. We also went to a 5-ply silicone based hose rather than the factory rubber. Another major change to the hose is the increase in diameter going up to 3” from the factory 2.5” (on the 17+ models). Taking feedback from customers and install shops, we found a need for injectable and reference ports. By adding these this allows the customer to install water/methanol injection nozzles, boost reference (for example a gauge), or nitrous all while not having to drill anything on the truck. The port angles are also the optimal angle for injectables.
Now available in black anodized only.
This kit includes:
SPE designed billet aluminum throttle body adapter
Silicone hose coupler
T-Bolt Clamps (2)
NPT Plugs (3)
NOTE- If you're using an aftermarket intercooler, measure your intercooler outlet. MOST are 3". If that is the case and you have a 17-22 Powerstroke you'll need to choose the 11-16 kit in order to have the correct size hose.
Good product easy install need paper instructions but everything else perfect
Great service. Nicely machined!
Super easy install. Great knowin that’s another factory part that will never fail me.
Been too cold to install it. Checked the connectors which was my big concern. Had the factory one blow off last summer . Fortunately did not rip the hose. have been searching for a replacement and found this one. Expected Great quality, like the pump kit I bought awhile back.
Second product from SPE and love it, quality fit and finish and the look is much better than factory
Bought as insurance and it does not disappoint! Looks amazing and install was super easy!
This is so easy to install..
I travel from South Texas to North Texas every week 8 hrs each way..now I don't worry about getting stranded I'm also getting the Hot Side pipe. If you own a 6.7 Powerstroke, you need this piece of mind
Installed in about 45 minutes. Looks great!
Great fit. Installed in less than 15 minutes. Looking forward to many more years of service
Awesome piece highly recommended
Over all it is a good product. better than stock. The Billet housing could have tighter tolerances. Mine wobbles pretty good. I'm afraid as the o-ring wears, I could possibly lose boost pressure. The bigger issue is where the factory sensor plug in. Mine would not stay in place. I had to use RTV to get it to hold with out blowing out.
Components installed on a 2020 F450. Have been monitoring data on a Bank iDash for some time now and thought I had a great running truck with only 22k on the clock. However, after installing both the cold and hot side CAC tubes, I now have a better throttle response and significant increases in boost pressure. These psi gains are at much lower EGTs than ever before. Even seeing 9-10 psi under engine brake on, deceleration conditions, flat Florida ground, with a nominal 18k load. In summary, must have had a leak somewhere with a faulty o-ring and must have picked up flow efficiency with the larger diameter hot side. Either way I think this was money well spent. Will by more from SPE. *Install tip – add a little of that dielectric grease not only to the o-rings but to the silicon hose ends for much easier installation.
Ordered this kit and had it next day SPE always comes thru when I need parts and this kit is well made and works great ! Definitely Better than some kits I’ve used in the past on my previous 6.7’s. Can’t wait to get the full piping kit next great job SPE!!
SPE quality is very good. If SPE doesn't make it for my 6.7L I probably don't need it.
SPE is always great… No complaints about any of their products especially this one. Brothers truck blew a hole in this pipe at 65k so just did one on both mine and his. Super easy to install and fits perfectly. First one took 30 minutes, second one took 10 minutes.
Blown my factory cold side pipe on my way home from a hunting trip 3 hours away from home. Wasn’t even giving it hell just down shifted to pass a car cruising 75 and boom. I already had spe cold side in my cart. Ordered it and dang it was here next day awesome shipping and it looks amazing! More spe parts to come for sure..
easy to install, perfect fit
Arrived very promptly! Love the fit and look and ease of installation!! It’s nice to not have to worry about the stock one cracking on long trips! Thank you SPE!
Great fitment and the billet throttle body adapter finish work is amazing
Installed the cold side pipe on my 2018 F350 6.7 diesel and it works great! Install was very easy and product and parts are high quality. I will try and use more of the companies products, if can afford to do so. Great product!
Quality product. Appearance is great. Installing was easy. Instructions want you to clock your sensor down so ports face up. My fan shroud interferes with the sensor so I couldn't.
Super easy install, looks much better in the truck that the factory piece. Made install of an aftermarket intercooler possible. Solid build quality, will be getting the hot side pipe soon too!
Multiple dealers telling me my 2016 f250 truck is fine with not holding boost and getting avg 12 mpg. I swapped out intercooler pipes, now it holds boost and get an avg of 18.5mpg. Great replacement part even if your truck runs perfect. Would even recommend to ford for future models to include.
Fit perfect, easy installation
Very easy install. Installation guide with pictures included with my part for step by step instructions. Had to modify temperature sensor and find a solution for wire harness hanging down. Would definitely recommend to others.
Everything fit well and performs well. The temp sensor was a little hard to get seated and locked it.
Awesome product and it arrived quickly. Very Happy with service and product!
Great quality fits perfectly. Looks much better than the stock one.
Well I installed it after the dealer called and Said the hose had split and for an outrageous amount they would install one. What a stock O.E.M. for over $500?? I installed it but then I got a code P007. So I replaced the sensor and now had the original but now P0402. Managed to finally get the first code cleared but now the second one. Exhaust Reciriculation Flow Excessive Detected. ?? Everything like EGR Valve, Vacuum, is almost working g. Not sure but if anyone knows anything about it send them my way. 2017 Alumiduty 6.7. W/66K
All parts I ordered are sexy glad I made the purchase
Very easy to install, and the black looks amazing. We tow a 38’ fifth wheel and don’t want to take any chances.
Easy install. Took a few minutes! Quality seems great. Would recommend!
Spot on look ,
Looks great , great quantity, easy install
Few more things to do when installing but I think it's easier than the hot pipe.
Works just as advertised!!! Quality product. Only small glitch was the hose clamp that feeds to the Inter cooler was a bit small but I simply used the stock clamp. Great product overall
Relatively easy install. Looks nice and way better quality than OEM.
Nice product but the charge air temp sensor doesn’t have a way to stay retained once you twist it into place, so you have to rely on the o-ring to keep itself from rotating.
Love this component I installed it along with the new hi flow thermostat. Couldn't be happier with its performance, although I'm in California and can delete my truck I did have a noticeable difference in the response of the engine getting better air flow into the engine. Cannot wait to purchase the hot side pipes to match the performance and increase the drivability of my 2016
Quick and easy install. Glad to eliminate one of the vulnerabilities in my 2019 6.7 Powerstroke.
Replaced my sinister pipes for these babies, better fit, less clamps, tighter fit too!
Extremely happy with the quality parts I’ve received from SPE. Especially after the plastic factory cold side pipe blew apart right at the throttle body connection.
No more weak OEM cold pipe confidence back in the skinny pedal parts fit perfect quality product.
Great product looks great and works exactly as told
Easy install seem much beefier than stock definite improvement
Another part that I was happy to get since I had a small tear in the factory piece. The only complaint was that I got the clamp as tight as I could on the intercooler side, but had to use the factory clamp to get it tight enough.
First time purchasing from SPE, it was a nice easy process of purchasing, and shipping was prompt! Received my package within a couple of days of purchase. Installation of the new pipe was nice and easy. Very nice fit and finish of product, I will be buying more from SPE.
Clean easy install
Very easy installation.
Great quality, easy install. No doubt it will hold up better than stock. And it looks awesome!! Highly recommend.
Great fit great quality
The part fit perfect and works great. The only thing I would change and it’s very minor, is the bolts on the hose claps are to long and requires a 10mm deep socket to tighten them.
The instructions were easy to follow and didn’t skip a step. Very easy to install (under 20 minutes). But the best part about this kit is the peace of mind having quality parts that I can count on installed on this truck.
Quality product, exactly as advertised! Much better than stock!
Easy to install. Awesome billet aluminum connection, superior hose material and nice strong clamps.
Good Quality. Thank you guys
The guy I dealt with can't rember his name was great first time I have called in and order need it fast he gave me next day option showed up and went on great and looks even better then I thought it would
Great product. Only issue I have with it is there is no clip to keep the CAC temp sensor from turning and then coming loose. I just routed the wire and tie wrapped it in such a way to keep it from rotating loose.
This pipe fits perfectly on my ‘17 6.7. Very simple installation with great instructions.
Fast shipping. Great product. Only issue I have is with the CAC temperature sensor bong. It snaps in when you turn it in the original. The SPE version has no way to keep it from turning back. Other than that everything is great quality.
excellent customer service! parts came quickly.fast and easy installation. instructions also sent to me for installation! Extremely happy with parts and customer service. truck running great. will definately use this web site again!
Great folks to work with! Excellent products! Easy installation. Quick shipping! Any questions about installation there’s a YouTube video on it. About a 10 to 15 minute install?
I decided to replace my OEM hose at 60K miles. This was after losing two of them on my last F250 diesel, one leaving me limping through the west Texas desert to LA. Product seems of great quality and performance is noticeably improved, too.
Quality second to none received my order in a few days and couldn't be happier.
Everything went smooth. Great product easy to install. I haul 10,000 pounds on this truck every day no issues. I will be ordering more parts soon. Keep up the good work.
I was really impressed with quality of this charge pipe kit. Everything fit great and looks great as well. I am more impressed how SPE helped me out. I told them that my charge piping was failing on my truck and I was limping along. They sent my upgrade charge pipe out really quick so I could get back to normal.
This cold side pipe kit is awesome, every piece is top notch, install is a breeze and everything fit as it should. When my stock pipe split down the middle there was no chance I was putting another cheap rubber hose in its place.
Great product. Extremely easy install. Directions were easy to read. Highly recommend this product with this company
Easy installation! Provides me with confidence in reliability over the stock plastic part.
Great upgrade. Everything you need again parts are high quality. Easy to install. Everything lines up great.
It was a super easy install and the new parts are extremely good quality. I wish i would have done this sooner. Thanks!
Good clean easy kit.
all went well with install, like the unit other than the way the flow sensor sits in hole and how loose it is as it could fall out. My son has same unit so I asked him about it and he said he call you guys regarding it, and you said it should be fine and not fall out, but I don't believe that. To me, its a design flaw.
After adding a 100hp tune to my truck the cold side pipe kept popping off on me.
Installed the new SPE cold side pipe, no cold side pipe issues since then. Very happy with the quality of the materials.
My first SPE product purchase and it did not disappoint. Nice beefy hose that still looks appealing under the hood. It has a glossy finish look that really stands out. Get this product and avoid being stuck on the side of the road when the factory pipe blows. Great job SPE! I will be a returning customer for sure.
I will recommend SPE to anyone. Super fast delivery and very easy to install. Took about 10 minutes total. Instructions that came with the part are very detailed. Will definitely be a repeat customer in the future
SPE delivers with flying colors yet again for me. Even with a snow storm they were able to process my order and have it shipped and delivered with 5 days. They kept me updated the entire time and we’re very responsive with any question or issue I had. This is the 3rd product I’ve ordered from them, I have never had a failure with any of their products and they are all made with the best quality. I am a customer for life that is more than thrilled with SPE. 100/10 does recommend.
Easy install. Seems to do the job. Hard to give a longevity review just yet…
Very well made product. Solves a very common and unavoidable failure. Installation is super easy. Will definitely be turning to SPE for more parts in the future.
Easy enstall. Great product. Shipping could be better though. Waited almost a month to ship.
It's very straightforward Install fit like a glove now I have peace of mind and looks Great
Installed the hot and cold side pipes pretty easy install and looks great! Shipping is slooowww and Communication with your customers could use some work still waiting on the radiator hose.
Extremely easy install, easy to follow instructions.
All the parts were there and were quality. Read through the instructions and looked at a YouTube video, went out and did it in 15 minutes, taking my time.
No issues, started right up and I put it to work right away.
Spe is nothing but top notch products. You can tell they put everything they have into what they engineer. I have nothing but spe products on my PS. Love my cold side!
Easy enough getting the old one off and upon inspection it was starting to crack inside. Installation went pretty smooth though I did have a little trouble getting the temp sensor installed but it finally went in. Hardest part of the install was getting my arm in space to push hose onto inter-cooler. Pretty sure this will be a great improvement and save a failure in the future.
- Very well made.
- Easy to install. It came with instructions (and plenty of other "how to" on YouTube).
- Looks great.
Being completely honest, I have not seen a difference in performance in my tuned & deleted 2015 F250. However, this was never meant to necessarily improve performance, but instead - to prevent a failure.
My truck is a performance based work truck that hauls and tows. I'm confident I'll never have a failure like so many others have had with the stock pipes.
Super easy install took under 20 minutes other than me breaking the little O-ring on the sensor and having to replace it no biggie ace hardware had the tiny o ring I needed for the air sensor . Highly recommend
Great product & the install video on the YouTube channel was very helpful!
Love it, was a little tuff to install in a sense that the hose is so strong that it was a little challenging to install, however after installed, OMG LOVE IT. also love your products I had also installed the water thermostat and works better and flawless in this south Florida heat. Thanks for a great product again. Next I want the cheese grater .
Great product! Installed in less the 30min
Great quality product
Fit and finish perfect! Thank you for making quality products.
Great product , haven't had an issue since I installed it. Installation was a breeze superior quality to other brands for sure
Great fit way better than the mishimoto cold side kit
Awesome product and great fit! Couldn’t be happier.
Excellent quality and easy to install..great upgrade to the flimsy factory tube that's prone to blowing out
High quality stuff. Definitely not a China knockoff. 100% satisfied with my new cold side pipe. Hose clamps could be just a little bit bigger because it was pretty hard to get on there once the tube was on the cooler but it did slide on.
The only thing I don’t like is that the only thing holding in the air sensor is the o-ring and a quarter turn of the sensor. The sensor does not lock in.
Awesome product and the YouTube videos made it an easy installation!
Sign up to get the latest on sales, new releases and other cool sh*t…