Randy M.
Installed on 2024 and everything fit flawlessly. Best looking kit on the market
Bernard B.
Does what I needs to do. Great option for those of us who wish to retain an actual air box and not an open filter in the engine compartment. Fitment was good. I like that it retains the factor intake gaskets for simplicity if they ever need replacement down the road. Design allows easy access to valley with simple removal of plastic intake tube and hot side pipe. Visually the intake was sloppy looking. A lot of grinding marks. Not a great finish. I donāt have a show truck so itās fine but for the price could look a lot better. Wish a little more pride was taken in the look of the part.
Wyatt D.
Fit perfect and was supplied everything I needed and nothing was missing. Will be continuing to purchase from SPE
Jeffrey S.
Install went well. The EGR interferes with the new MAP sensor location on the SPE intake (2019). In order to get even distribution of water methanol I changed my water methanol setup to a 4 injectors from the 2 injectors I was using as the ports on the SPE manifold are after the āYā. The throttle definitely feels more responsive with the SPE manifold. Since I had everything apart for the manifold installation I also did the coolant hose re-route, upper and lower radiator hoses and the CCV re-route with the external catch can. Overall they are all extremely well made products and were installed relatively easily. Iām looking forward to purchasing a stage II motor from SPE when the time comes.
TIMOTHY L.
2012 F550 Cab chassis 4x4 Dually 6.7 power stroke I bought a piping kit had it powder coated I love it there is a lot of room now it was pretty much easy to install. Engine sounds great.
Thank you SPE awesome kit!
Wilson C.
Very straight forward install! Installed the disaster prevention kit too when I installed this since I already had to take it all apart!
Jaron P.
Havenāt put it on the truck due to pulling the turbo but when I get it back together Iāll be sure to take pictures I love this kit I did a lot a research on the piping kits and I always ended up back at spe ever time I love the way it looks and works for these truck it help with a lot of problems that these trucks shouldnāt have thank you spe for your product
jesse m.
Easy install and looks great.
Cody P.
Worked perfect with my S&B intake. Kit was very well built and included everything you need to install it minus the silicone coupler for the center turbo inlet which I just reused the factory one. Overall very happy with the intake kit alone side the hotside piping.
Garett M.
everything fit pretty good except clamps and when i contacted and voiced my concern they basically told me to bad that's what they say fits. i could not get them on, but i don like the look and performance gains after i got the proper clamps.
Kevin S.
Quality products. Great customer service.
Kyle C.
SPE has my business as long as they make parts for my 6.7. I have their ccv reroute, upper rad hose and low temp thermostat. Most recently i got the full intake piping from them and wow. They never disappoint. Truck runs like it can breath now. Better fuel mileage? Yes. Slightly lower temps? Yes. A little more turbo noise? Yes. Significantly better throttle response? Definitely. Also got the hot side pipe. All fit great. Install is a little tricky because Iām not a diesel mechanic by any stretch. But i got it done. Thanks SPE!!!!
Shawn S.
This piping kit is awesome! Cleans up the engine bay so much, gets rid of the junk plastic intake, makes working in the engine bay so much easier. I can hear the difference with how much better my truck breathes. Love having the cold and hot side pipes not plastic anymore either would highly recommend to anyone!
Nicholas B.
Intake and piping take up way less room in the engine bay than the stock components perform better and look better I was wanting to make the truck more reliable and I think this will do just that.
Zachary K.
Easy installation, sounds great and my 64/66mm turbo spool much better.
John F.
Great figment, and really cleans up the engine bay.
Chris W.
Looks great fits great very happy over all. had it for over a year before I got around to installing it. Polished the spe on Y pipe and powder coated it with blue oval blue. got almost done and found out the 90Ā° boot off lower outlet of intercooler was not the right size contacted support and Amy really came thru had new boot next day.
Jose S.
Great quality parts fit perfect just came with a few scratches
ARNOLD J.
LOVE THE PIPING KIT. LOOKS GREAT, SOUNDS BETTER AND PERFORMS GREAT. I HAVE UPGRADED MY 2011 POWERSTROKE USING SPE PRODUCTS AND AM VERY PLEASED WITH THE QUALITY AND THEIR ASSISTANCE. THANKS CHANCE
Oscar L.
2017 F-250. The piping kit looks great! Just make sure to tighten down enough on hose coming off y pipe. I had it blow off, but it was because I was hesitant about tightening down too much. So I retightened, and everything has been fine since that one episode. Truck runs perfectly, no codes on dash, no other issues at all. I had also added the hot side piping kit, coolant reroute kit, upper radiator hose, and SPE thermostat. One last thing, all was ordered on May 15,2024 and delivered May 20,2024. Thank you SPE!
Kyle B.
Didnāt realize I needed to trim my turbo on my 2014. Ended up fitting once I trimmed 1ā off the turbo
Josh W.
Install was not bad at all. However, you can put the cold side piping on the wrong way. Make sure you pay attention to where the bung goes.( to the driver side not the middle)
I donāt notice much on preference gains but I did notice my EGTās were lower when pulling. Thatās always a win in my books.
Highly recommend.
David Z.
It come quicker then anticipated an was very well packaged!!! I took all the piping to my local shop an got it powder coated before install. Install went very well an quick. I was very pleased how it turned out. Looks great an really cleaned up the engine bay. Definitely recommend to anyone.
Cody R.
Well its been on the truck for almost a week my mpgs have gone up and so has the smiles per gallon as well. Definitely helps the truck breathe better
Jeffrey D.
I followed the instructions and everything was perfect. The sound of the turbo is a little more noticeable. The stock turbo intake had gunk in it because I had about 145k miles on it before I did the CCV reroute kit. So now it is breathing better. I am fully deleted and excited to see how it does on a road trip not towing vs towing. Thanks to SPE for providing quality components for the Scorpion 6.7l Powerstroke!!!!!
Scott R.
This is one badass pipe kit!! Fits like a glove, looks great and really cleans up the engine bay by getting rid of that plastic upper intake and that big ass lower manifold. I've only had it installed for a couple days so any added preformance is yet to be determined.
Dylan S.
Intake piping kit was exactly as designed and all parts feel to be very high quality. Install was relatively simple and the finished product really cleans up room in the engine bay for any future service. I Was not aware that a CCV reroute would be needed for install but was able to make it happen.. Highly Recommend!!!
nick s.
Great fit and finish. Canāt beat especially for the great price.
JOHN V.
Quality of the product second to none. Fit and finish was spot on. Direct bolt on couldn't get any easier.
Kenneth E.
I've been wanting this piping kit since SPE came out with it. Got this, and the disaster prevention kit too. Made installing easier since the factory intake has to come out anyway. The quality of the piping kit is pretty good. I would have thought the intake Y would have been a bit more finished for the price. But if you powder coated it would probably hide the casting flaws. Fitment of the piping was spot on. Although I'm not sure why the intake air sensor was moved 180Ā° from the OEM. This makes you have clock the powersteering reservoir. The bracket for the oil and trans dipstick was missing from the box. I contacted SPE and they sent one out right away. To my surprise it didn't fit that well. I wound up cutting off an inch of it to work properly. At the end of the day it's a decent kit. Really happy not to have had to put the factory maze of piping back in. Cleans up the engine bay and opens up alot of areas that otherwise would be hard to access.
Joseph P.
I was hoping i would not have to do any cutting on my factory GT 32 dual boost 2011-14 turbo, so I have not installed the intake piping kit yet. I got use to all the other SPE products being pretty much plug and play, so I'm a little hesitant about cutting on my turbo to fully install the kit. I should have done some YouTube research first. Other than that, great product. I would recommend to my friends. Will upload before and after pics once I get a free weekend and cutting tool.
Blake B.
Awesome fit and finish as always. Thank you SPE!
Matt C.
Love it! Cleans up the engine bay, performs great, sounds great, looks even better!
Ryan R.
Great customer service and the parts are spot on, and fit great!
Bryan S.
I just installed this today 2/7/24 along with the coolant reroute kit and the hot side pipe kit. I coupled this with the Ezlynk with proven tunes. This was a relative painless install with the exception of a couple back bolts. As you can see from the pictures it cleans up the engine bay completely. Iām doing the CCV reroute tomorrow to finish my project. So far the throttle response is unbelievable!!! The power is insane too and I havenāt even played with the tunes really yet. I am set at the 120hp tune. TBH, Iām hesitant to do the 230hp increase. Itās already hard to hold it on the road.
Eric M.
Makes the engine bay look good and performs like it should.
Sabin G.
Well worth the money! Frees up the engine bay so much and gets rid of all the factory plastic and rubber parts. The throttle response is so much better with clean, free pipes and nothing blocking the airflow.
James P.
Kit looks amazing and fits like a glove! Kit goes together some what easy. If I could make a change it would be to change out the Allen key bolts for some hex head bolts, they are a pain in the butt to work in tight, hard to reach places. A parts list as to what should be in the box would be very helpful so I know if Iām missing anything in the kit. Also had some hose clamps that seem to be to big to use anywhere. Had to use some of the old ones. Couldnāt go wrong with adding an installation video as an option to reference on the website.
Jaime T.
If the upper intake if the on the top would have been a one inch more long it would have been perfect
John H.
been running this product for a month now and amazing product turbo screams now, throttle response was an instant notice for me run so much better and is faster best product on the market and nasty look for the engine bay
Arturo L.
It fit like a glove!!!! Looks amazing and I honestly feel throttle response increased. I have been following SPE for about 2 years and just love their dedication and expertise they put in all of their products!!! TopCorey was a huge influence to start paying attention in SPE. Thank you guys so much!!!
Angel-Ivan C.
Outstanding intake kit.. quality, fit and finish are great. I have a new truck now.
Michael S.
Install was pretty easy and it looks great. The black wrinkle coat makes it look even better. I have SPE everywhere under my hood. Everything always fits nice and the quality is top notch.
Karen T.
Easy installation. Makes engine bay look clean.
Adam S.
High quality and perfect fit. Would recommend to all 6.7 owners.
Adam S.
Just like all other SPE products, high quality and perfect fit.
Trenton
Quality was terrible for what you pay the main intake had pockets of casting sand and the main opening was not square had to take it to a machine shop and spend a extra 450 dollars to have it fixed was not impressed with the quality reached out them and never heard back from them had me send them pics and everything and then never responded customer service is terrible you call to talk to the person you. Have been emailing with and you get told āthey donāt have time to talk to you!ā
Brandon D.
Piping kit fit awesome, top quality product, I wouldnāt go with any other brand, this cleans the engine bay up so much. Also had awesome customer support when contacting before purchase.
Zachary A.
Finally got around to removing the OEM manifolds, cleans up the engine bay nicely.
Arturo
They are one the leading innovative companies in Diesel performance. They pour their heart and soul into every product offered. The precision is always on point and they will never leave you alone on your projects. Simply the Best!!!
Micah M.
Very pleased with the SPE piping kit.It arrived in a timely manner and l was well informed with shipping updates. The fit and finish is wonderful.Much better looking than the factory plastic plumbing and you can also hear the exhaust brake more.
rich o.
have not installed it yet , but it looks great and fast shipping thanks !! will do video this Sunday 12/3 23 when installed
Jack M.
Don't be afraid to pull the trigger on this bad ass intake kit the smile you'll have on your face when you stomp on it will eliminate any buyers remorse instantly.
As always SPE hit the nail on the head.
Thanks again SPE and I will definitely be back for more.
Dalton B.
Absolutely awesome. Fit and finish is perfect. Can never go wrong with SPE!
Bryan M.
Another great product! Fits perfect with no issues. Easy install and simple instructions!
Eduardo G.
Great product easy installation. Recomendable
Adam F.
Great kit. Really cleans up the engine bay. Fit is perfect as to be expected with SPE.
Corwyn C.
It was a great install even without instructions that weren't included but if you have the knowledge of where stuff should be then it goes well
Jamie W.
This fits perfectly on the truck. All pipework and boots fit great. Would definitely recommend.
Curtis P.
Fits perfect love the look
Bradley E.
My trucks spoil up time has decreased and I can feel the added performance.
Benjamin
Best kit I've seen
Enno R.
2017 F-350 install
The craftsmanship of this piping kit is flawless, fitting and install was very easy. Combined with S&B open intake, the disaster kit, and cold side pipe this baby breathes and runs like a top. After install upgrade tunes to Modern Diesels SOTF tunes and it ran 10 times better then my previous tunes. Good job SPE!
Evan B.
Great looking product! I look foward to having the peace of mind of not worrying about the factory intake leaking!
Chad P.
I've purchased nearly the entire SPE catalog for my 2018 F250 Limited, and everything has been top notch. The intake piping kit in particular was particularly well made and fit perfectly with all my other parts. Had everything powdercoated wrinkle black to give the engine bay a stealth look and it turned out great! Installed an upgraded Mishimoto intercooler at the same time as the piping kit, and now the truck feels way more responsive, definitely picked up additional torque.
J L.
Thereās a lot of SPE in this picture. Every part is worth its weight in gold to me!
Jacom D.
Did not install it yet , I ordered the wrong lower air intake adaptor.
Edward B.
Very professional and the customer service was awesome. I haven't installed the air intake kit as of yet but I will upload pictures at a later time. By the way, the kit looks great and you can tell its a build that's quality made. Way to go SPE!!!
Hunter C.
Hardest part is gettin every things factory out. Did the ccv with catch can, colorant line reroute, thermostat with radiator hose. The intercooler piping was good only this I didnāt like was the hex head bolt for me were hard to get to. All and all is doable at the house. Very please so far. Also did S&B CAI.
Alex B.
I havenāt installed it yet but it looks great and shipped fast just like everything else Iāve bought from spe has beat my expectations
James N.
Great kit, however, it would be nice if they supplied new intake manifold o-rings instead of telling you to use the old ones. For $1250 one would think they could throw in the $20.00 o-rings.
Nicholas H.
Took a while to get but the product is worth the wait once again spe has hit this out of the park fit and finish is amazing the instructions are very good awesome product
Cody F.
Everything fits perfectly and looks amazing on my 2014 f350
Intake piping kit goes very nicely with all my other SPE parts especially coolant re-route kit
Nic M.
Easy install, works awesome. But expect a small belt "chirp" when you turn the key off it just happens by nature of kit. Otherwise this kit is awesome
Corey C.
Really noticed more power along with that amazing whistling sound you get from the turbo, i was holding off on buying this kit bc of the price but now I wish I would of bought it right away, Itās worth every penny! Thanks again SPE
Mike M.
Haven't installed it yet I know it's fitment will be great as all your products are I personalized it and anodized it to match what's inder the hood already looks great I sent a photo of my custom work to your product and I know your product will finish bringing the beast alive thank you for your precision engineering
Dylan L.
I am really impressed with SPE products I will absolutely be purchasing many more in the future! All around 10/10!!
Raul F.
I love the product looks good and it performs great And you can feel definitely more horsepower !!!!!!!!
Allen S.
Excellent customer service and it fits perfectly and the staff is always great with asking about the quality and if your happy with the product you have purchased I love SPE and the products they have and will.be a life long customer
Tim B.
Great product! Fits great and easy install! SPE all the way!
Kevyn James K.
Fit and finish of parts were good.
Wish there had been more clearance between the turbo cold intake and the exhaust manifold collector. Definitely a tight fit.
Itās definitely a good upgrade it allows the turbo to breath and be more responsive to throttle input.
Also makes for a cleaner engine bay.
John T.
overall I liked it but on the intake y pipe the elbow to flange distance should be increased 1/2 inch and it will fit the 11-14 with the dual inlet turbo better
Virgil A.
I'm very satisfied with the pipeing kit. It looks great and runs even better
Jared H.
Love the product. Looks great under the hood, definitely cleaned up the engine bay. I would suggest getting the coolant reroute kit for sure and the ccv reroute kit. I was not aware that it didnt have a port for the ccv so I didnāt order the ccv kit but after installing I will be ordering it next. The clamp on the bottom side of the cac pipe is super tight. But it all fits, had to push over the power steering reservoir but not a big problem. Took about 4 hours total getting everything off and new parts put on. Well worth the 4 month wait to get it. Happy with the looks and performance. Also added the hot side pipe for a matching look. Over all happy with the product. Picture was taken before cleaning everything after install.
Zach F.
Quality parts that work period. Temps dropped 20+ degrees. Everything fits perfect. Only issue I ran into was the t bolt clamp for the cold side reduced to intercooler. That clamp just barely fits, just in case someone doing it reads these reviews it might help you.
Armaund G.
GREAT addition.
Awesome spool up and response!!!
A must have.
Joseph P.
As Iāve come to expect from buying products from spe for my 6.7 over the last couple years the kit went in without any problem.
Jeff I.
Quality products, very satisfied with the results.
michael b.
Let's start off by saying the customer service here is awesome! I usually get a response thru email within 5 to 10 min. The kit itself is awsome! I wish I would have bought sooner. I ended up powdercoating the pipes to give it that extra pop! Definitely recommend buying!
Manny G.
Best of the best!
Franco G.
SPE ftw! Love it !
Robert P.
Great products and quality. Pretty easy install and really cleans up the engine bay. A whole lot better response when you get on it, looks bada$$. SPE products are great quality and well worth the money.
Troy F.
It really looks good on the engine.
Quality product
Troy F.
Seems like a solid component.
Manley b.
Super easy to install love how easy it is to get to everything after it is installed super clean look
Chayce L.
Fitment is perfect! Install was much more smooth than other competitor piping kits Iāve installed, price point is good and was still able to utilize the S&B intake I already had installed. Great product SPE!