Now there is an easy way to mount you EZ-Lynk Shift on the fly switch. Introducing the 5-Position Switch Mount. This mount bolts directly to the bottom of your dash. That means no drilling, cutting, or putting holes in your dash. This bracket is laser cut from stainless steel and Made in the USA.
Great solution to mount the SOTF switch without drilling holes in my truck!
Will L.
Although I didn't purchase it for its intended use, it worked perfectly for the potentiometer I chose for my high idle modification. Solid design and would recommend.
Charlie B.
The OBD switch needed to have the ears cut off to make the bracket fit! I like how it ticks it out of the way in the truck for a clean install.
Rickey K.
Love not having to drill a hole in my dash the was worth the cost of the part
Blake R.
Very easy to install and fits perfectly in place of the factory holes, even used the same screws so no drilling, cutting, or fabricating necessary. Solid product!
Levi L.
Love they way it tucked up underneath out of the way and holds solid no rattling
Victor B.
Looks sharp and is very sturdy.
Gary B.
Fits perfectly
Marc M.
Easy install, cleans up under the dash. No more soft switch just hanging there! Another over the top product from SPE
Ethan R.
Great fitment! Tucks well under dash out of way yet convient to reach while driving. Clean well manufactured product great coustomer service. Would highly recomend over drilling hole in dash. So far i love my spe products!
Ron B.
Fits great very clean look
Kenneth C.
Bolts right on fits good without having to drill a hole. Mounts were you can’t tell it’s even there. It is a bit hard to get to quickly though. Well worth the money!!!!
Carson W.
The mounting bracket does exactly what I needed. Clean, secure mounting spot for my SOTF dial without drilling my dash. Perfect!
James L.
Quick fast and easy shipping had questions along the way. Company is quick and very informative!
Adam D.
Awesome fit and makes everything clean under the dash!
Zach H.
Looks amazing.
Jeremy D.
Great quality product with great finish
Jerrod H.
Best place to put the sotf. No unnecessary holes in the dash.
Adam P.
The gdp switch I got fits crooked in the hole. The little white tab is off so the #1 position is at the 3:00 mark.
edward d.
Was a better looking install opiton than drilling into plastic .
Trey P.
Very good quality and perfect for my high idle switch
Kenny R.
Love SPE
Jason F.
Installs in 5 minutes and looks great.
Eric C.
Perfect, hides it just enough but you have it if you want it reachable.
Brendon C.
Bracket is solid! Took about 20 min to install from door open to door closed. 8mm socket and needle nose for the fastener for the switch is self and good to go.
Cassie C.
Thank you for the quick turn around. We originally ordered the wrong size and then ordered the correct size. Turn around time efficient. Thank you!
Thomas R.
Awesome product definitely recommend
Chris S.
It fit perfect. Looks nice and keeps the cord-switch out of the way.
Timothy S.
Product performs as advertised. Customer support is definitely lacking.
Andrew S.
Awesome product!!!
Branden O.
Amazing
DUSTIN D.
Quality parts as usual from SPE.
Super clean look. Keeps everything nice and tidy.
Michael F.
Extremely well built Bracket. Looks great inside truck. I would highly recommend this item.
Cody p.
The bracket arrived quickly and they provided tracking info as soon as it shipped. Seems to be very heavy duty and well made and fits the truck perfect. Definitely happy I don't have to drill holes in my dash. Great product but what really sets this company apart and the reason I will be a return customer is their spectacular customer service. I ordered their 6.7 tunes through another company and they even reached out to that company for me with questions that I had. Excited to see how the tuning performs but I have no doubt it will be just what I needed!
PAUL M.
Easy to install, looks great and does exactly what its supposed to.
Michael G.
It looks great and easy install great product thank you
Michael T.
Fits nice around the OBD port. Nice quality switch plate, finished well. Happy with my purchase.
Ryan M.
Nothing but the best products from SPE. SPE has high standards in quality and performance and it reflects in their product.
Eddy C.
Great product......well designed. Looks good too.
lance c.
Fits perfectly. Makes use of switch very easy
Christian R.
Mounting the SOFT switch was very easy. It makes it so simple to change tune levels and you don’t have to drill into the dashboard.
Andrew H.
Quality product and material!!
yasiel q.
i love it fit perfect
Bo P.
Haven't installed it yet still waiting on my upgrade kit, but it looks great and very well made I'm sure it will be a nice addition to my truck!!!
Ben H.
ModernDieselCorey turned me on to this product. Perfect solution for mounting 5 position switch out of the way without drilling into the truck.
Justin T.
Perfect fit and keeps the switch in a discreet but easily accessible location. Way better than drilling into panels.
Cody D.
Fits great. Cleans up the cab very well
tony m.
The bracket fit great! I like how discrete the switch is and how the OBD port is incorporated with the bracket. The cable holder is a definite plus too!
Bradley N.
Awesome design....
Justin H.
The switch mount makes for a clean install without having to drill your dash to mount. Good idea and quality!
Steve S.
Excellent
Shawn M.
Makes mounting the switch so much easier than drilling an ugly hole in someone's expensive dash.
Joseph K.
It’s as described.
David R.
Shipment was super fast, unboxed the bracket and removed this bubble wrap which was nicely wrapped. Very good quality and easy to install. Happy with the purchased!!
Mike F.
Works great easy to install thanks
Mike O.
Fit perfect and does exactly what it’s supposed to do and it looks good. Thanks. So much better than having to drill holes
Bryce H.
Easy to install, great fit and looks killer. THANK YOU!!
Nate G.
Good mount but not as pictured didn’t have the small square hole for the extra wire to be stored in.
Nicholas B.
Love the fact of not having to drill a hole in the dash.
Tim H.
Nice quality
CUSTOM DRAPERY I.
Works exactly as its supposed to and very easy to install. So much better then drilling a hole in your dash and having that ugly switch exposed. Access is convenient and fairly easy to get to.
Steven T.
Great product makes for an easy and clean looking install!
Sean C.
SPE was very fast to respond to emails and product was very good quality.
Brendon L.
Looks great, does its job. Had to make one of the holes a little bigger wouldn’t fit over the stud for some reason but wasn’t a big deal
Michael K.
Even with the holidays the delivery was on time
Chris C.
Other than production delays, it was worth it.
Tommy W.
Awesome service!
Matthew T.
This bracket was not what I was expecting. This I a nice heavy duty bracket. That could hold more then a switch. Looks great and is a great touch for anyone looking for a bracket to hold you switch.
Jeremie C.
Works great fit great and easy to install. LOVE IT Thanks SPE
Travis R.
Was looking for an option to not drill my dash and came across this. Super clean look and easy install
William B.
product is of high quality and very simple to install. highly recommend it to anyone
Taylor R.
Fit and finish is great, although I paid for overnight shipping it took 2-3 days to arrive
brock M.
Top notch - fits just like it needs to and functions beautifully.
John N.
Easy install! Nice to be able shift on fly.
Connor M.
Works great in my 6.4 Powerstroke! Installed it and the switch, and it couldn't be easier. No drilling, lining up holes, or pulling apart the dash to mount the switch. Plus, it's in a great spot. It stays out of the way, but is very accessible. I'm a tall person, so I worried that my legs or feet might bend the bracket, but it's pretty beefy and doesn't hang low enough to get hit. Will 100% install this on any truck I put a switch in ever again.
Tanis A.
Took about 2 minutes to put on, hidden and out of the way didn’t have to drill a hole, really like it!
Austin G.
Great company kept me informed with every step of my order.
Erich G.
Great parts as always!! Fit great! Keeps the 5 position switch hidden but easily accessible.
Tremayne H.
It's hands on & hands
down the best
Brad H.
Fit is perfect. No need to drill a hole in the dash. Perfect option for anyone who wants a SOTF switch but doesn’t want to drill a hole in the brand new truck
William L.
Easy install
Tom S.
Great product, easy install for my SOFT on my 2015 powerstroke. Doesn't get any better.
<tom> PA
Justin N.
Great product
Wayne H.
Fits perfectly. Just like an OEM part but with upgraded badging. Thank you!!!
Thomas E.
SPE shipped quickly and the product worked well. Thanks
Ryan C.
The installation was super simple and it looks very clean under the dash. I would highly recommend this text one that’s doing a switch on the fly Because then u don’t have to drill into ur brand new Expensive truck
Ty T.
I really like this option to mount the SOTF vs drilling a hole in the dash.
marcos o.
Product was as describe. 5-10 min install being lazy. Works perfect.
Keith B.
Nice little mount!
james f.
Fit and finish was perfect.I mounted my switch and it looks awesome
Justin S.
5 position sotf mount is quality material, easy to mount on my 14 powerstroke. Didn’t want to mess with drilling through the dash somewhere and I heard these brackets from spe we’re quality and they are. Highly recommend.
Joey S.
Perfect offered exactly what I was needing. Avoided me drilling any holes in my instrument panel.
Chad H.
Easy installation. Works awsome
Chris G.
Great option for mounting your sotf switch! Good quality too! Love it
MIKE H.
Looks good fit perfect
Loren P.
Great product, makes for a clean install of the SOTF switch in my F250
Chad J.
Fits Like a dream and is a really nice looking light weight piece! No one else is doing this type of quality and detail!
Dustin R.
Looks great and the best part is I don't have to drill a hole in my dash!
Joshua S.
Installed the SPE shift on the fly switch bracket, perfect fit and looks great! Another great product from SPE.
Joshua S.
Awesome little part! Must have for Ez Lynk SOFT KIT.
Subscribe
Sign up to get the latest on sales, new releases and other cool sh*t…
Liquid error: Could not find asset snippets/swymSnippet.liquid