THIS ITEM IS IN STOCK WITH A ROUGH ETA OF 3-5 WEEKS ON A NEW ORDER DEPENDING ON OPTIONS!
SPE 6.7 Powerstroke Intake Piping Kit
SPE Motorsport is proud to finally introduce our upgraded intercooler/intake piping kit for the 6.7L Powerstroke. This kit replaces the restrictive factory plastic upper intake and cast aluminum lower intake. SPE has developed our kits to cover 2011-2019 trucks 11+ cab & chassis turbos, 15-19 VGT, and also Non-VGT turbo kits. The SPE piping kit includes all aluminum polished piping, cast aluminum Y manifold, 5-ply silicone couplers, t-bolts clamps, and hardware.
The SPE cast aluminum Y manifold has a true 3” internal diameter unlike the rest of the kits on the market, along with cast-in injectable bosses and the use of factory style o-ring gaskets for ease of installation and replacement. The cast Y manifold is available in raw or micro-wrinkle black powder coat.
The cold side pipe is 3.5” diameter unlike the more common 3” seen in most competitor's kits. This not only helps with flow but also gives your engine bay a bolder, tougher look. SPE also includes a welded on billet IAT bung so that it can be installed and used as the manufacture intended. This, too, is not commonly seen in competitor's kits. In our experience, this is an integral part in collecting data and for PCM functionality.
With so many customers already having cold air intakes previously installed, SPE wanted to make our kit so that you could use that investment and not have to sell or get rid of it. We include a high quality rotomolded adapter that cleanly connects all stock and aftermarket cold air kits to your turbo with multiple adapter options based on turbo style and truck. This piping kit is an excellent match for the SPE Emperor Turbo System.
It gets even better. If/when you decide to change turbochargers you will just need to purchase the appropriate Lower Air Intake Adapter to fit the new turbo you're installing.
Features
11-19 model years (only works for the 11+ cab & chassis trucks; does not support the dual boost turbos on the 11-14 trucks at this time)
Cast aluminum intake manifold with large 3” internal diameter
Injectable bosses (can be drilled as needed, can be used for water meth, nitrous, propane, EGR, etc.)
Utilizes factory intake gaskets
5-Ply silicone couplers
3.5” cold side pipe
Utilizes/retains factory CAC IAT sensor
Retain your stock style connection cold air intakes with SPE’s lower intake adapter
Fits most turbo setups including VGT and NON-VGT*
Increases HP, torque, and throttle response
*Clearances can vary depending on how some turbo kits are made.
Love the kit! Shipping took a minute but worth the wait!
Reuben C.
SPE has great products. Lots of research put into the products. Intake fit well. Institutions were clear.
Andrew R.
Kit is nice, As others have said the cold pipe pushes on the power steering reservoir (I think every manufacturer has this problem) would be nice to see a small bracket that helps relocate the reservoir over a few inches. And also at idle my dipstick tube are vibrating like crazy, maybe a stiffer dipstick tube bracket to help with this. Overall it's a nice looking kit, easy install.
Nick R.
SPE is the best hands down!! You can’t go wrong with this product it looks and sounds amazing!! Best looking on the market! And I love that they make the correct adapter to mount up to my S&B intake so I don’t have to purchase a different one!
Arthur S.
My stock intake had so much carbon build up that it was choking my engine's power out. The SPE intake piping kit unleashed that power! Wow, what a difference!
Stu E.
Great product with excellent quality and fit. They only thing I changed during the install is the Y-horn mount bolts from Allen cap screws to stainless bolts, I like the finished look of the cap screws but just had a hard time with the back ones. Being a helicopter mechanic I didn't want several different sized bolts. Very minor issue.
Mike H.
Great pipe set
Jay J.
Quality parts make the install easy..
Stephen L.
Good quality as usual from SPE instructions were great definitely an improvement over stock, only issue is pipe pushed power steering reservoir have to try and relocate it, also the dip stick mount is not very ideal could be better designed.
Randy A.
I just installed the intake kit not too bad to install the clamps are a little bit tight tolerance but overall very happy. Also installed a outside intercooler pipe the coolant line cleanup kit, upper radiator hose, low temp high flow thermostat, disaster prevention kit and injector return repair kit. Keep the parts coming SPE parts rock!
Zachary B.
Great products and info on all of it.
Michael I.
I have purchased pretty much every SPE product that is produced for my 2019 F-250 and I have to say, their products are phenomenal. Everything from the CCV reroute kit to the disaster prevention kit, to the intercooler piping has fit very nice and easy to install. I have a few more small items that I have installed as well. The emperor turbo kit has been ordered. I’m sure it will be top notch as well. Thanks for making the best truck parts guys! Keep up the solid work.
Darin C.
I am so impressed on how this kit performs. Super easy to install.
Lenny W.
Took awhile to get because of high order numbers but it was worth the wait. Great fit and finish.
Freeman K.
It’s was pretty easy to put it in the truck took about an hour very Satisfying
Donald S.
Fit good and looks way better than stock intake manifolds
Terry C.
After waiting 4 and a half months it finally arrived. The installation was pretty straightforward and product looks great. It really helps cleans up the engine bay. Just wish the cold air intake would have arrived at the same time.
Bruce S.
I really like the kit. I had trouble with oil dipstick tube and getting it to fit just right. I ended up finding direction on SPE website. After following the advice on the website it fit perfectly.
Ryan K.
Love the products from SPE. The Y bridge intake manifold plus the hot and cold side boost tubes are a much better product than factory and look a lot better as well. engine bay cleaned up nice with this addition. only down side to the kit was the T-clamps are a bit short which makes getting the nuts started a bit of a pain with everything being so congested in the bay. Have yet to take it out on a road trip but I am sure ill see lower intake temps and have a little faster throttle response. Thanks again for the great products and keep coming out with new and better additions.
sid s.
A great piping kit love the sound and the look couldn’t be more pleased
Curtis T.
Great product. Truck runs great. You can not get a better product Thank you
Edye R.
Once again very pleased. Perfect fit and looks amazing!!!
Edye R.
Looks great and fits perfect!!! Love the space it has now. Waiting for it paid off!! Definitely recommend this intake kit.
Stanley F.
I love the parts I haven't installed it yet but I'm hoping it looks and performs like I
believe it will
Subscribe
Sign up to get the latest on sales, new releases and other cool sh*t…